Sony DG910 Instructions Manual - Page 95
Video, The MULTI CHANNEL DECODING lamp
UPC - 027242707023
View all Sony DG910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
There is no sound from the surround back speaker. • Some discs have no Dolby Digital Surround EX flag even though the packages have Dolby Digital Surround EX logos. In this case, select "SB ON" (page 52). There is no sound from the sub woofer. • Check that the sub woofer is connected correctly and securely. • Make sure you have turned on your sub woofer. • Make sure the sub woofer is set to "YES" (page 48). • Depending on the selected sound field, no sound output from the sub woofer. • When all speakers are set to "LARGE" and "NEO6 CIN" or "NEO MUS" is selected, there is no sound from the sub woofer. The surround effect cannot be obtained. • Make sure the sound field function is on (press MOVIE or MUSIC). • Sound fields do not function for signals with a sampling frequency of more than 48 kHz. Dolby Digital or DTS multi channel sound is not reproduced. • Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format. • When connecting the DVD player, etc., to the digital input jacks of this receiver, check the audio setting (the settings for the audio output) of the connected component. Recording cannot be carried out. • Check that the components are connected correctly. • Select the source component using the input buttons (page 41). The MULTI CHANNEL DECODING lamp does not light up in blue. • Check that the playback component is connected to a digital jack and the input is selected properly on this receiver. • Check whether the input source of the software being played back corresponds to the multi channel format. • Check whether the setup on the playback component is set to multi channel sound. • Check whether the digital audio output of selected input is not assigned to another component input using DIGITAL ASSIGN function (page 79). Video There is no picture or an unclear picture appears on the TV screen. • Select the appropriate input using the input buttons. • Set your TV to the appropriate input mode. • Move your audio components away from the TV. • Assign the composite video input to DMPORT input correctly. • Depending on the DIGITAL MEDIA PORT adapter, video output may not be possible. The source image input to the HDMI jack on the receiver is not output from the TV. • Check the HDMI connection. • Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component. Recording cannot be carried out. • Check that the components are connected correctly. • Select the source component using the input buttons (page 41). Additional Information continued 95US