Sony DG910 Instructions Manual - Page 67
Using the controls on the, receiver, In case of poor FM stereo, reception
UPC - 027242707023
View all Sony DG910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Tuner Operations 1 Press TUNER repeatedly to select the FM or AM band. 2 Press TUNING + or TUNING -. Press TUNING + to scan from low to high; press TUNING - to scan from high to low. The receiver stops scanning whenever a station is received. Using the controls on the receiver 1 Turn INPUT SELECTOR to select the FM or AM band. 2 Press TUNING MODE repeatedly to select "AUTO T.". 3 Turn TUNING +/-. In case of poor FM stereo reception If the FM stereo reception is poor and "ST" flashes on the display, select monaural audio so that the sound will be less distorted. • To select monaural audio, set "FM MODE" in TUNER menu to "FM MONO" (page 53). • To return to stereo mode, set "FM MODE" in TUNER menu to "FM AUTO" (page 53). Direct tuning You can enter the frequency of a station directly by using the numeric buttons. SAT TV SA-CD/CD TUNER 1 AUX DMPORT RECEIVER 2CH A.F.D. MOVIE MUSIC CATEGORY SLEEP MODE D.TUNING AUTO CAL 2 123 3 456 789 -/-- CLEAR 0/10 ENTER 4 >10 MEMORY 1 Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Press D.TUNING. 3 Press the numeric buttons to enter the frequency. Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 b 0 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0 4 Press ENTER. You can also use MEMORY/ENTER on the receiver. Tip If you have tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception. If you cannot tune in a station Make sure you have entered the right frequency. If not, repeat steps 2 to 4. If you still cannot tune in a station, the frequency is not used in your area. 67US