Sony HCD-HDX500 Operating Instructions - Page 27
Getting Started - ADVANCED -, Turning off the Demonstration, Setting the demonstration mode to on/off
View all Sony HCD-HDX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Getting Started - ADVANCED - Getting Started - ADVANCED - Turning off the Demonstration "/1 X/x/c, SYSTEM MENU Setting the demonstration mode to on/off 1 Press SYSTEM MENU. 2 Press X/x repeatedly until "DEMO" appears in the front panel display, then press or c. 3 Press X/x to select a setting. The default setting is underlined. • "DEMO ON": sets the demonstration mode to on. • "DEMO OFF": sets the demonstration mode to off. 4 Press . The setting is made. 5 Press SYSTEM MENU. The system menu turns off. After connecting the AC power cord (mains lead), the demonstration appears in the front panel display. When you press "/1 on the remote, the demonstration turns off. Note • When you press "/1 on the unit, the demonstration does not turn off. • When you set the demonstration mode in the system menu to on, the demonstration does not turn off even though you press "/1 on the remote. To turn off the demonstration, set the demonstration mode to off, then press "/1 on the remote. When the demonstration mode is set to off, the system saves power in standby mode. • If the system is at its factory default settings (ex. after performing "COLD RESET" (page 94)), you can turn off the demonstration simply by pressing "/1 on the remote. Otherwise, to stop the demonstration, you need to set "DEMO" to "DEMO OFF." 27US