Sony HCD-HDX500 Operating Instructions - Page 93
Adjusting the speaker level by using the test tone, DISTANCE SURROUND], LEVEL FRONT], LEVEL SURROUND]
View all Sony HCD-HDX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
x [DISTANCE (SURROUND)] The default distance setting for the speakers in relation to the listening position is shown below. When you set the distance using the Quick Setup (page 24), the settings is automatically displayed. 0.00 - 7.00 m2)/ 0 - 23 ft Be sure to change the value in the Setup Display when you move the speakers. [L/R] Surround speaker distance 3.00 m/10 ft1)3) from the listening position can (appears when you be set from 0.00 to 7.00 set [SURROUND] to meters2) (0 to 23 ft). [YES] in the [CONNECTION] setting.) 1)When you perform the Quick Setup (page 24), the default settings are changed. 2)0.00 to 7.01 meters for North American models. 3)3.04 m/10 ft for North American models. Note • Depending on the input stream, the [DISTANCE] setting may not be effective. • When the speaker distance setting is not in the recommended range, / ** m is displayed (** being the number). indicates over the recommended distance. indicates below. x [LEVEL (FRONT)] You can vary the level of front speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment. [L/R] 0.0 dB Set this between -6.0 dB and +6.0 dB. [CENTER] 0.0 dB (appears when you set [CENTER] to [YES] in the [CONNECTION] setting.) Set this between -6.0 dB and +6.0 dB. [SUBWOOFER] +2.0 dB Set this between -6.0 dB and +6.0 dB. x [LEVEL (SURROUND)] You can vary the level of surround speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment. [L/R] 0.0 dB (appears when you set [SURROUND] to [YES] in the [CONNECTION] setting.) Set this between -6.0 dB and +6.0 dB. To adjust the volume of all the speakers at one time Turn the VOLUME control on the unit, or press VOLUME +/- on the remote. x [TEST TONE] The speakers will emit a test tone to adjust [LEVEL (FRONT)] and [LEVEL (SURROUND)]. [OFF] [ON] The test tone is not emitted from the speakers. The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [SPEAKER SETUP] items, the test tone is emitted from each speaker in sequence. Advanced Settings and Adjustments Adjusting the speaker level by using the test tone 1 Press DISPLAY when the system is in stop mode. The Control Menu display appears. 2 Press X/x to select [SETUP], then press . The options for [SETUP] appear. continued 93US