Sony HDWS280 Product Manual (Operation Manual 1st Edition (Revised 5)) - Page 33
P2 Video P3 Audio P4 Tc
View all Sony HDWS280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 3 Preparations Item SETUP/ BLACK Y/C DELY Setting Sets the setup level (59.94i mode) or black level (50i mode) of the HD/SD output signal. PRESET: Regardless of manually set values, the level is set to the standard value. Manual setting: With the displayed setting flashing, you can adjust the setup level across the range ±30 IRE (59.94i mode) or adjust the black level across the range ±210 mV (50i mode) by rotating the MULTI CONTROL knob. Sets the Y/C delay during playback of an analog Betacam cassette. PRESET: Regardless of manually set values, the Y/C delay is set to the standard value. Manual setting: With the displayed setting flashing, you can adjust the Y/C delay across the range ±100 ns by rotating the MULTI CONTROL knob. P2 VIDEO page Item VIDEO IN OUT REF SYNC Setting Selects the input video signal. SDI: HD SDI signal SG: Test signal generated by the internal test signal generator (To select SG, hold the corresponding function button pressed for more than three seconds.) Selects the reference signal of this unit, according to the settings of setup menu items 309 and 334, and the operating state of this unit. REF: Use the signal input to the REF INPUT connector as the reference signal. During recording, input digital audio signals and video signals must be synchronized with this signal. INPUT: Use the input video signal as the reference signal. Sets the HD output signal sync phase. With the displayed setting flashing by pressing the SYNC function button, you can turn the MULTI CONTROL knob to adjust the output signal sync phase across the range ±15 µs relative to this unit's input reference signal. Adjust this item when you want to adjust the output signal sync phase precisely to match a reference signal, or when connecting this unit and other VTRs to a device such as a switcher to carry out operations such as special effects editing. SC Sets the HD output signal sync phase (fine adjustment). With the displayed setting flashing by pressing the SC function button, turn the MULTI CONTROL knob to adjust the output signal sync phase across the range of ±200 ns relative to this unit's input reference signal. P3 AUDIO page Item Setting AUDIO IN Selects an audio input signal. The selected signal is shown at INPUT in the audio data area. ANALOG: Analog audio signal SDI: SDI signal SG: SG signal MONITR L Selects an output signal from the AUDIO MONITOR OUTPUT L connector (CH1/CH2/ CH3/CH4/CUE). The selected signal is shown at MONI L in the audio data area. MONITR R Selects an output signal from the AUDIO MONITOR OUTPUT R connector (CH1/CH2/ CH3/CH4/CUE). The selected signal is shown at MONI R in the audio data area. LEVEL MT Sets the audio level meter displayed on the video monitor display. LEFT: Display the audio level meter on the left of the video monitor display. RIGHT: Display the audio level meter on the right of the video monitor display. LEFT (4): Displays the four-channel audio level meters on the left of the video monitor display. RIGHT (4): Displays the four-channel audio level meters on the right of the video monitor display. OFF: Not display the audio level meter. EMPHASIS Specifies whether to add audio emphasis to analog audio input signals and Betacam/ Betacam SP format playback audio signals. ON: Add audio emphasis. OFF: Do not add audio emphasis. DOLBY NR When using oxide tapes, this is to specify whether or not to use the Dolby type C lowfrequency noise reduction (NR) system. ON: Use the Dolby NR system when playing back analog Betacam oxide tapes. OFF: Do not use the Dolby NR system when playing back analog Betacam oxide tapes. P4 TC page Item TCG Setting Selects the signal source to which the internal timecode generator synchronizes. The selected timecode appears in the timecode setup area. INT: Synchronize according to the initial preset value set by front panel operation or by remote control from the device connected to the REMOTE 9P connector, or synchronize to the timecode of the playback tape. EXT: Synchronize to the timecode signal input via the TIME CODE IN connector. SDI: Synchronize to the timecode data superimposed on the HD SDI signal input to the HD SDI INPUT connector. 33 Basic Operations of the Function Menu