Sony HDWS280 Product Manual (Operation Manual 1st Edition (Revised 5)) - Page 80

Chapter 10 Maintenance and Inspection 10-3 Error Messages This unit is equipped with a self-diagnosis function, and if a problem is detected, displays an error message in the time data display and on the monitor. If an error message appears, contact your Sony service representative. Indications on the monitor The error message and code also appear superimposed on a monitor connected to the COMPOSITE OUT 2 (SUPER) connector, HD SDI OUTPUT (SUPER) connectors, or SDI OUT 2 (SUPER) connector. Depending on the error code, an indication of the source of the problem may appear as a secondary error message. Indications in the time data display If a problem is detected, the ALARM indicator lights in the display window, and an error code appears in time data display area. CHARACTR ON PB/EE PB CONFI DISABLE COND ALARM CTL/TC CTL ASSEMBLE 59.94i SDI OFF VIUC DF INT- PRE F-RUN REM: M TCG SET HOME E14-001 Error Message List ERROR-01 REEL TROUBLE-1 Error message displays • To display error messages and codes superimposed on the monitor, set the CHARACTR on the HOME page of the function menu to ON. • Some error messages have no associated error codes. In this case, they appear in the time data display. • Error messages with error codes are saved in NV-RAM (non-volatile memory) as an error log. • In some cases the error message is slightly different on the monitor and in the time data display. Code 01 02 03 Message REEL TROUBLE REEL TROUBLE REEL TROUBLE 04 REEL TROUBLE 05 REEL TROUBLE 06 TAPE TENSION 07 CAPSTAN TROUBLE 08 DRUM TROUBLE 09 TH/UNTH MOTOR 0A THREADING 10 HUMID 12 TAPE TOP SENSOR 13 TAPE END SENSOR 14 FAN MOTOR 20 CASS COMP MOTOR 92 INTERNAL I/F1 Description Tape slacking has been detected in the threading or unthreading operation. Tape slacking or tape breaking has been detected in the SEARCH, FF, or REW mode. Tape slacking, tape breaking, or supply or take-up reel locking has been detected in the REC or PLAY mode. A malfunctional tape transport speed has been detected in the FF or REW mode. A malfunctional operation of the supply or take-up reel has been detected during cassette insertion. Excessive tape tension has been detected in the REC or PLAY mode. Malfunction of capstan motor has been detected. Malfunction of drum motor has been detected. Malfunction of threading or unthreading operation has been detected. The tape top processing has not been completed in the threading mode. Dew condensation has been detected. Malfunction of tape top sensor has been detected. Malfunction of tape end sensor has been detected. Malfunction of cooling fan motor has been detected. Malfunction of cassette compartment-up or down operation has been detected. Abnormality in the interface between SYS CPU (on SY-320 board) and SYS NV-RAM (SY-320 board) has been detected. 80 Error Messages