Sony HDWS280 Product Manual (Operation Manual 1st Edition (Revised 5)) - Page 36
Superimposed, Character Information
View all Sony HDWS280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 3 Preparations 3-8 Superimposed Character Information When CHARACTR on the HOME page of the function menu is set to ON, the video signal output from the HD SDI OUTPUT (SUPER) connectors, SDI OUT 2 (SUPER) connector, or COMPOSITE OUT 2 (SUPER) connector contains superimposed character information, including timecodes, menu settings, and alarm messages. Adjusting the character display You can adjust the position, size, and type of the superimposed characters using setup menu items 002, 003, 005, 009, 011, and 012. For details on setup menu items 002, 003, 005, 009, 011, and 012, see page 63 and page 64. Information displayed 4 Field mark of VITC data 3 Drop-frame mark of the timecode generator 2 Drop-frame mark of the timecode reader 1 Type of time data Time data TCR . 2 3 : 5 9 . 4 0 . 1 8 * P SHUT T L E ST I L L 6 Operation mode 5 Selection of recorder/player Note The display shown above corresponds to the factory default settings of the unit. Changing the setting of setup menu item 005 allows different time data to be displayed on the lower line of the display. For details on setup menu item 005, see page 63. a Type of time data Display CTL TCR UBR TCR. UBR. TCG UBG IN OUT DUR Meaning Data of the CTL counter Timecode read by the LTC reader User's bit read by the LTC reader Timecode read by the VITC reader User's bit read by the VITC reader Timecode generated by the timecode generator User's bit generated by the timecode generator IN point OUT point Duration between the IN and OUT points Note If the time data or user's bits cannot be read correctly, each item in question will be displayed with an asterisk. Example: T*R, U*R, T*R. or U*R. b Drop frame mark of the timecode reader (for 59.94i mode only) ".": Indicates drop frame mode ":": Indicates non-drop-frame mode c Drop frame mark of the timecode generator (for 59.94i mode only) ".": Indicates drop frame mode (factory preset) ":": Indicates non-drop-frame mode d Field mark of VITC data (blank): Fields 1 and 3 (for 59.94i mode) or fields 1, 3, 5 and 7 (for 50i mode) "*": Fields 2 and 4 (for 59.94i mode) or fields 2, 4, 6 and 8 (for 50i mode) e Selection of recorder/player The indication changes as follows, according to the setting for R/P on the P5 EDIT page of the function menu: P: PLAYER is selected. R: RECORDER is selected. f Operation mode The field is divided into three blocks: A, B and C. Block A: Displays the operation mode. Block B: Displays the servo lock status or tape speed. Block C: Displays a x mark to indicate an edit section during automatic editing. 36 Superimposed Character Information