Sony HT-M5 Operating Instructions - Page 36

• Compatibility with all encoding/writing softwares, recording devices, and recording media cannot be guaranteed. Incompatible USB device may produce noise or interrupted audio or may not play at all. • Some time may be needed to start playback when: - the folder structure is complex. - the memory capacity is excessive. • This receiver does not necessarily support all the functions provided in a connected USB device. • The playback order for the receiver may differ from the playback order of the connected USB device. • Folders that have no audio files are skipped. • When playing a very long track, some operations may cause playback delay. USB message list Message and explanation READING The receiver is recognizing and reading information of the USB device. DEVICE ERROR The memory of the USB device could not be recognized (page 34). NO SUPPORT An unsupported USB device is connected, an unknown device is connected, or the USB device is connected through a USB hub (page 34). NO.DEVICE No USB device is connected or the connected USB device is not recognized. NO TRACK No track was found. 36US Viewing information on the display panel The display panel provides various information of the receiver status such as sound field. Input buttons AMP MENU DISPLAY 1 Press the corresponding input button which you want to check the information. 2 Press DISPLAY repeatedly. Each time you press the button, the display changes cyclically as follows: Index name of the input* t Selected input t Sound field currently applied t Volume level t Stream info** When listening to FM and AM radio Preset station name* t Frequency t Sound field currently applied t Volume level * Index name appears only when you have assigned one to the input or preset station (page 33, 40). Index name does not appear when only blank spaces have been entered, or it is the same as the input name. **Stream information may not be displayed.