Sony HT-M5 Operating Instructions - Page 40

3 Press MEMORY. 4 Press the numeric buttons to select a preset number. You can also press PRESET + or PRESET - to select a preset number. 5 Press ENTER. The station is stored as the selected preset number. 6 Repeat steps 1 to 5 to store another station. Tuning to preset stations 1 Press TUNER repeatedly (or press FM or AM) to select the FM or AM band. 2 Press PRESET + or PRESET - repeatedly to select the station. Each time you press the button, you can select a preset station as follows: You can also press the numeric buttons to enter the preset station. To tune to the selection, press ENTER. 4 Press V/v repeatedly to select "TUNER", then press or b. 5 Press V/v repeatedly to select "NAME IN", then press or b. The cursor flashes and you can enter a character. 6 Press V/v to select a character, then press B/b to move the input position backward and forward. You can enter up to 8 characters to name the station. Tips • You can select the character type as follows by pressing V/v. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, press b without selecting a character. If you made a mistake Press B/b until the character you want to change flashes, then press V/v to select the correct character. 7 Press . The name you entered is registered. Naming preset stations 1 Press TUNER repeatedly (or press FM or AM) to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Tune to the preset station you want to create an index name for (page 40). 3 Press AMP MENU. 40US