Sony HT-M5 Operating Instructions - Page 55
Additional Information, There is no sound, or only a very low, level sound is heard from specific
View all Sony HT-M5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
There is no sound, or only a very lowlevel sound is heard from specific speakers. • Check that all the cords are fully inserted into the jacks on both the receiver and the equipment. • Make sure you have connected to both the L and R jacks of an analog equipment, analog equipment requires both L and R jack connections. Use an audio cord (not supplied). • Adjust the speaker level (page 31). • Check that the speaker cords (supplied) are connected correctly and securely (page 18). • Check that the subwoofer is connected correctly and securely. There is no sound from a specific equipment. • Check that the equipment is connected correctly to the audio input jacks for that equipment. • Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the equipment. • Check the INPUT MODE (page 46). • Check the setting of "AUDIO.OUT" in the HDMI menu (page 51). • Check that the equipment is connected correctly to the HDMI jack for that equipment. • You cannot listen to the Super Audio CD by connecting HDMI. • Depending on the playback equipment, you may need to set up the HDMI setting of the equipment. Refer to the operating instructions supplied with each equipment. • Be sure to use a High Speed HDMI cable when you view images or listen to sound, especially for the 1080p, Deep Color (Deep Colour) or 3D transmission. • Audio signals (format, sampling frequency, bit length, etc.) transmitted from an HDMI jack may be suppressed by the connected equipment. Check the setup of the connected equipment if the image is poor or the sound does not come out of the equipment connected via the HDMI cable. • When the connected equipment is not compatible with copyright protection technology (HDCP), the image and/or the sound from the HDMI TV OUT jack may be distorted or may not be output. If this is the case, check the specification of the connected equipment. • The image resolution of the playback equipment may need to be at certain settings before you can enjoy Multi Channel Linear PCM. Refer to the operating instructions of the playback equipment. • Make sure the TV is compatible with the System Audio Control function. • If the TV does not have System Audio Control function, set the "AUDIO.OUT" settings in the HDMI menu to - "TV+AMP" if you want to listen to the sound from the TV speaker and receiver. - "AMP" if you want to listen to the sound from the receiver. • When you connect the receiver to a video equipment (projector, etc.), sound may not be output from the receiver. In this case, set the "AUDIO.OUT" to "AMP" in the HDMI menu (page 51). • If you cannot listen to the sound of the equipment connected to the receiver while a TV is selected on the receiver. - Be sure to change the input of the receiver to HDMI when you want to watch a program on the equipment connected via HDMI connection to the receiver. - Change the TV channel when you want to watch a TV broadcast. Additional Information continued 55US