Sony HXR-MC2000U Operation Guide - Page 79
SPOT FOCUS, EXPOSURE, FOCUS, You can fix the brightness of a picture
View all Sony HXR-MC2000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Notes [EXPOSURE] is automatically set to [MANUAL]. SPOT FOCUS You can select and adjust the focal point to aim it at a subject not located at the center of the screen. FOCUS You can adjust the focus manually. You can select this function also when you want to focus on a certain subject intentionally. Touch the subject in the frame of which you want to adjust the focus. To adjust the focus automatically, touch [AUTO]. Notes [FOCUS] is automatically set to [MANUAL]. EXPOSURE You can fix the brightness of a picture manually. Adjust the brightness when the subject is too bright or too dark. Touch / to adjust the brightness. To adjust the exposure automatically, touch [AUTO]. Tips You can also adjust the setting manually by using the RING (p. 31). Touch (nearby subject)/ (distant subject) to adjust the focus. To adjust the focus automatically, touch [AUTO]. Notes When you set [FOCUS] to [MANUAL], appears. The minimum possible distance between camcorder and subject while maintaining sharp focus is about 1 cm (about 13/32 in.) for wide angle and about 80 cm (about 31 1/2 in.) for telephoto. Tips appears when the focus cannot be adjusted any closer, and appears when the focus cannot be adjusted farther away. It is easier to focus on the subject by moving the power zoom lever towards T (telephoto) to adjust the focus, then towards W (wide angle) to adjust the zoom for recording. When you want to record a subject at close range, move the power zoom lever to W (wide angle), then adjust the focus. The focal distance information (distance at which the subject is focused on; used as a guide if it is dark and focus adjustment is difficult) appears for a few seconds in the following cases. (This information will not display correctly if a conversion lens (sold separately) is being used.) When the focus mode is switched from automatic to manual When you set focus manually You can also adjust the setting manually by using the RING (p. 31). US 79 Customizing your camcorder