Sony ILCE-9M2 Operating Instructions - Page 13

Notes on discarding or transferring a memory card to others Executing [Format] or [Delete] on the camera or a computer may not completely delete the data on the memory card. When transferring a memory card to others, we recommend that you delete the data completely using data deletion software. When discarding a memory card, we recommend that you physically destroy it. Note on network functions When you use network functions, unintended third parties on the network may access the camera, depending on the usage environment. For example, unauthorized access to the camera may occur in network environments to which another network device is connected or can connect without permission. Sony bears no responsibility for any loss or damage caused by connecting to such network environments. Note on the 5 GHz band for wireless LAN When using the wireless LAN function outdoors, set the band to 2.4 GHz by following the procedure below. (WW942051 only) ••MENU  (Network)  [Wi-Fi Settings] How to turn off wireless network functions (Wi-Fi, etc.) temporarily When you board an airplane, etc., you can turn off all wireless network functions temporarily using [Airplane Mode]. CAUTION For safety, do not connect the connector for peripheral device wiring that might have excessive voltage to LAN terminal. Follow the instructions for LAN terminal. Power Cord For the customers in the UK, Ireland, Malta, Cyprus and Saudi Arabia Use the power cord (A). For safety reasons, the power cord (B) is not intended for above countries/regions and shall therefore not be used there. For the customers in other EU countries/regions Use the power cord (B). (A) (B) LAN cable Use a Category 5e or higher Shielded Twisted Pair (STP) cable with high shielding performance. GB 13