Sony ILCE-9M2 Operating Instructions - Page 198

TC Output Sets whether or not to layer the TC (time code) information on the output signal via the HDMI terminal when outputting the signal to other professional-use devices. This function layers the time code information on the HDMI output signal. The product sends the time code information as digital data, not as an image displayed on the screen. The connected device can then refer to the digital data to recognize the time data. MENU  (Setup)  [HDMI Settings]  [ TC Output]  desired setting. On: Time code is output to other devices. Off: Time code is not output to other devices. Note ••When [ TC Output] is set to [On], the image may not be output properly to the TV or recording device. In such cases, set [ TC Output] to [Off]. REC Control If you connect the camera to an external recorder/player, you can remotely command the recorder/player to start/stop recording using the camera. MENU  (Setup)  [HDMI Settings]  [ REC Control]  desired setting. On:  The camera can send a recording command to an external recorder/player. The camera is sending a recording command to an external recorder/player. Off: The camera is not able to send a command to an external recorder/ player to start/stop recording. GB 198