Sony ILCE-9M2 Operating Instructions - Page 144
Shutter Type] is set to [Electronic Shutter]., flash sync terminal, the flash indicator will
View all Sony ILCE-9M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Note ••Set the exposure mode to manual exposure (other than ISO AUTO is recommended for ISO sensitivity), and set the shutter speed to the slower of the following values or slower: --1/200 seconds --The shutter speed recommended by the flash. ••Use flashes with a sync voltage of 400 V or lower. ••Turn off the flash connected to the sync cord when you connect the sync cord to the (flash sync) terminal. Otherwise, the flash may emit light when the sync cord is connected. ••The flash power level is set to full power. [Flash Comp.] cannot be set. ••Auto white balance function is not recommended. Use the custom white balance function to achieve a more accurate white balance (page 127). ••When a flash is connected to the (flash sync) terminal, the flash indicator will not be displayed. ••Flash cannot be used when [ Shutter Type] is set to [Electronic Shutter]. GB 144