Sony ILCE-9M2 Operating Instructions - Page 74

 Turn the drive mode dial and select (Continuous Shooting: Hi), (Continuous Shooting: Mid), or (Continuous Shooting: Lo).  Turn the focus mode dial and select AF-C (Continuous AF), then start shooting images. Hint ••If you want to display the timing of shooting on the screen during blackout- free shooting, adjust the setting using MENU  (Camera Settings 2)  [Shoot. Timing Disp.]. ••To take advantage of the performance of the camera, we recommend that you use a UHS-II memory card. Note ••When shooting without the shutter sound, do so on your own responsibility, with sufficient consideration to the privacy and portrait rights of the subject. ••Even if you set the camera to shoot without the shutter sound, it will not be completely silent. ••Even if you set the camera to shoot without the shutter sound, the aperture and focus will make sounds. ••When using a lens compatible with Aperture Drive in AF, sound from the aperture drive may be audible during continuous shooting if [Aperture Drive in AF] is set to [Focus Priority]. ••If you set [Audio signals] to [Off], the camera will not beep when the subject comes into focus or when the self-timer is in operation. ••During blackout-free shooting, the slower the shutter speed, the lower the refresh rate of the screen. If you want the screen display to be smooth in order to track the subject, set a shutter speed faster than 1/125 second. ••The electronic shutter operates differently when a Mount Adaptor is attached to the camera. GB 74