Sony ILCE-9M2 Operating Instructions - Page 205
Connecting the camera and a smartphone, Using a smartphone as a remote control for the camera
View all Sony ILCE-9M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Using network functions Connecting the camera and a smartphone Using a smartphone as a remote control for the camera With Imaging Edge Mobile, you can shoot images while checking the shooting range of the camera on the monitor of a smartphone. 1 MENU (Network) [Ctrl w/ Smartphone] [Ctrl w/ Smartphone], then select [On]. 2 Set up the camera and smartphone by following the procedure below. To establish a one-touch connection with an NFC-enabled smartphone Activate the NFC function of the smartphone. ••On an iPhone/iPad, launch Imaging Edge Mobile, and then select [Scan NFC/QR Code of the Camera] [Scan NFC of the Camera] to activate the NFC function. Switch the camera to the shooting mode. Touch the (N-Mark) on the camera to the smartphone for 1-2 seconds. ••If you are using an Android smartphone, touch the (N-Mark) on the camera to the (N-Mark) on the smartphone. Note ••If you cannot connect the camera to the smartphone using the NFC function, follow the procedure under "To establish a Wi-Fi connection with a smartphone using a QR code." GB 205