Sony KE-42M1 Operating Instructions (primary manual) - Page 27
Connecting a DVD Player with Component Video Connectors
View all Sony KE-42M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Connecting and Setting the TV Connecting a DVD Player with Component Video Connectors Use this hookup if: • Your DVD player has component (Y, PB, PR) jacks. Disconnect all power sources before making any connections. 1 Using a component video cable, connect the DVD player's Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the HD/DVD IN 4 connections. Tip The Y, PB and PR jacks on your DVD player are sometimes labeled as Y, CB and CR, or Y, B-Y and R-Y. If so, connect the cables to the matching colors. 2 Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to the TV's AUDIO IN jacks. Note The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide sound. AUDIO cable (not supplied) Y PB PR AUDIO-L (white) AUDIO-R (red) Rear of TV VIDEO IN 1 3 S VIDEO VIDEO L(MONO) AUDIO R HD/DVD IN 4 Y PB PR L AUDIO R Component video cable (not supplied) CENTER SPEAKER IN 180W (6 ) MAX L(MONO) AUDIO R AUDIO OUT (VAR/FIX) DVD player Tips • To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to 16:9 on your DVD player. For details, refer to the operating instructions supplied with your DVD player. • Some DVD players are equipped with the three component video connectors: Y - Green, PB (CB, Cb or B-Y) - Blue and PR (CR, Cr or R-Y) - Red. 27