Sony KE-42M1 Operating Instructions (primary manual) - Page 32

When connecting to the Digital Satellite Receiver's DVI-HDTV, connector

Page 32 highlights

When connecting to the Digital Satellite Receiver's DVI-HDTV connector If the Digital Satellite Receiver does not have an HDMI connector, you can connect the TV's HDMI IN connector to the Digital Satellite Receiver's DVI-HDTV OUT connector using the HDMI cable (not supplied). 1 Using a HDMI cable (not supplied), connect the Digital Satellite Receiver's DVI-HDTV OUT connector to the TV's HDMI IN connector. Use the HDMI IN 5 connection. Note The DVI-HDTV VIDEO connector does not provide audio, so audio cables must be connected to provide sound when an HDMI to DVI-HDTV adapter is used. 2 Using an AUDIO cable, connect the Digital Satellite Receiver's AUDIO OUT jacks to the TV's AUDIO IN jacks. Rear of TV Digital Satellite Receiver R L AUDIO IN 5 IN AUDIO-R (red) AUDIO-L (white) VIDEO IN 1 3 S VIDEO VIDEO L(MONO) AUDIO R HDMI to DVI-HDTV adapter or cable (not supplied) AUDIO cable (not supplied) 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

32
VIDEO IN
1
S VIDEO
VIDEO
AUDIO
L(MONO)
R
3
AUDIO IN
5
L
R
IN
HDMI to DVI-HDTV adapter
or cable (not supplied)
AUDIO-L (white)
AUDIO cable
(not supplied)
Digital Satellite Receiver
Rear of TV
AUDIO-R (red)
When connecting to the Digital Satellite Receiver’s DVI-HDTV
connector
If the Digital Satellite Receiver does not have an HDMI connector, you can
connect the TV’s HDMI IN connector to the Digital Satellite Receiver’s
DVI-HDTV OUT connector using the HDMI cable (not supplied).
1
Using a HDMI cable (not supplied), connect the Digital Satellite
Receiver’s DVI-HDTV OUT connector to the TV’s HDMI IN connector.
Use the HDMI IN 5 connection.
Note
The DVI-HDTV VIDEO connector does not provide audio, so audio cables must be
connected to provide sound when an HDMI to DVI-HDTV adapter is used.
2
Using an AUDIO cable, connect the Digital Satellite Receiver’s AUDIO
OUT jacks to the TV’s AUDIO IN jacks.