Sony KV-27FS100 Operating Instructions - Page 19
Connecting a TV, VCR, and Cable Box
View all Sony KV-27FS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Connecting Your TV Connecting a TV, VCR, and Cable Box Use this connection if you subscribe to a cable system that scrambles some channels (pay channels), but not all of them. This setup allows you to use the remote control to: ❏ change channels through your cable box or VCR when you are receiving a scrambled signal ❏ change channels through your TV This connection also allows you to use the PIP feature when you are viewing unscrambled channels coming directly into your TV from your cable. Scrambled signals coming through the cable box cannot be viewed in PIP. For more information on the PIP feature, see page 20. Rear of TV 1 3 4 VCR 2b 3 1 Splitter Cable 2a Cable Box Optional connection Video (yellow) Audio L (white) Audio R (red) 1 Connect the single input jack of the splitter to your incoming cable connection. 2 Using a coaxial cable (not supplied), connect the two output jacks of the splitter to: a) the IN jack on your cable box, and b) the VHF/UHF jack on the TV. 3 Using a coaxial cable (not supplied), connect the OUT jack on your cable box to the IN jack on your VCR. ✍ If you will be controlling all channel selections through your cable box, you should consider using the Channel Fix feature to set your TV to channel 3 or 4 (see page 27). ✍ You can use the button to switch between the VHF/UHF and VIDEO inputs. 11