Sony KV-27FS100 Operating Instructions - Page 20
Connecting a TV and Satellite Receiver - no picture
View all Sony KV-27FS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Operating Instructions Optional connection If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV. ✍ For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound; you still must connect the audio cables. Connecting a TV and Satellite Receiver From cable/ antenna Rear of TV 1 3 4 2 1 Satellite Receiver Satellite antenna cable 3 Video (yellow) Audio L (white) Audio R (red) 1 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver. 2 Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on your TV. 3 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to AUDIO/VIDEO IN on your TV. ✍ You can use the button to switch between the VHF/UHF and VIDEO inputs. ✍ For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound; you still must connect the audio cables. 12