Sony PCV-J150 System Reference Manual (primary manual) - Page 44
Removing an Add-in, Replacing the Side Panel
View all Sony PCV-J150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
30 VAIO® Reference Manual 8 If necessary, remove any add-in cards (see "Removing an Add-in Card" on page 28) to gain access to the battery. You may also need to disconnect some cables. ! Touch any exposed metal part of chassis to discharge static electricity in your body before handling an add-in card or other sensitive electronic component. 9 Use a flathead screwdriver to push in on the small tab inside the battery holder to pop out the battery. KY0072.VSD ✍ The battery is located just beneath the hard drive holder. Although you do not have to remove the hard drive holder, this illustration shows the battery with the drive holder removed for clarity. 10 Use your fingers to lift out the battery and dispose of it according to the instructions that came with the new battery. 11 Insert the new battery into the battery holder, with the plus (+) side up, and gently press down until the battery snaps into place. ✍ The Sony CR2032 battery is recommended. Using a type of battery other than a CR2032 may present a risk of fire or explosion. 12 Replace any add-in cards that were removed. 13 Reconnect any cables that were disconnected. 14 Replace the side panel (see "Replacing the Side Panel" on page 25). 15 Reconnect the power cord and turn on the computer.