Sony PCV-J150 System Reference Manual (primary manual) - Page 55

Heading2 - Installing a 3º” Internal Hard Disk Drive, Disconnect the power cord from the computer.

Get Sony PCV-J150 - Vaio Desktop Computer PDF manuals and user guides View all Sony PCV-J150 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Removing, Installing, and Replacing Components 41 Installing a 3½" Internal Hard Disk Drive Your system comes with an available bay to hold an additional 3½" IDE hard disk drive. Some models, such as Configure-to-Order (CTO) systems, may already have a second hard disk drive. Your system can support ATA-33, ATA-66, or ATA-100 hard disk drives. The drive you install must not require front panel access. The hard disk drive access light blinks when either internal drive is active. ! Before opening the system unit, save any open files, exit Windows, turn off the power of the computer and all attached peripherals, and then unplug the power cord. 1 Configure the jumpers on the new drive as a slave device (see your drive's documentation for configuration instructions). Power connector Jumpers Drive connector KY0084.VSD 2 Disconnect the power cord from the computer. 3 Remove the side panel (see "Removing the Side Panel" on page 22). 4 Lift the tab adjacent to the drive holder.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Removing, Installing, and Replacing Components
41
Installing a 3
½”
Internal Hard Disk Drive
Your system comes with an available bay to hold an additional 3
½”
IDE
hard disk drive. Some models, such as Configure-to-Order (CTO)
systems, may already have a second hard disk drive.
Your system can support ATA-33, ATA-66, or ATA-100 hard disk drives.
The drive you install must not require front panel access. The hard disk
drive access light blinks when either internal drive is active.
1
Configure the jumpers on the new drive as a slave device (see your
drive
’
s documentation for configuration instructions).
2
Disconnect the power cord from the computer.
3
Remove the side panel (see
“
Removing the Side Panel
”
on page 22).
4
Lift the tab adjacent to the drive holder.
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug
the power cord.
KY0084.VSD
Drive connector
Power connector
Jumpers