Sony PEG-N710C PictureGear Pocket Operating Instructions - Page 20

3 Advanced Functions PictureGear Pocket of Beam Pictures to Another CLIE Handheld PictureGear Pocket helps you to send pictures to the PictureGear Pocket application of another CLIE handheld using IR (Infrared) communication. Preparations Turn on IR communication of both sending and receiving CLIE handheld. Check whether the IR ports of the sending side and receiving side are positioned properly so that communications are possible between them. Place both CLIE handheld units to make their IR ports facing each other. The distance between them is 10 ~ 20 cm. There should be no obstruction between these units. Make sure that PictureGear Pocket is installed in both receiving and sending devices (e.g., your computer and CLIE handheld) to receive and send data. The optimal data transfer distance may differ depending on the operational relation between CLIE handheld and your computer, or devices other than Sony. Change the distance and try the procedure again. Start PictureGear Pocket of the sending side CLIE handheld. Selecting a picture Switch PictureGear Pocket of the sending side to the selection mode ([Preview Mode] or [List Mode]) and select a picture to be transferred. Reference: 2.2 "Selecting a picture in [Preview Mode]", 2.3 "Selecting a picture in [List Mode]". Beam a picture After switching the screen to [Full Screen Mode], tap the menu and then click the [Beam] icon from [Icon]. PictureGear Pocket detects the receiving side CLIE handheld and starts beaming the picture if communications are possible. You can only use the infrared data transfer function if picture files are stored in the CLIE handheld. If pictures are stored on a "Memory Stick," you cannot use this function. 10~20cm Receiving Side Sending Side You can transfer only one picture at one time. You cannot transfer multiple pictures. [Beam] icon Search Receiving Do not move the CLIE handheld units until the picture is transferred. After the picture is to beam, the sending side CLIE handheld returns to the status before the sending operation. The receiving side CLIE handheld displays the received picture in [Full Screen Mode]. 3.2 Even if PictureGear Pocket of the receiving side CLIE handheld is not started when the picture is received, the CLIE handheld still receives the picture. In this case, start PictureGear Pocket after receiving the picture. You can display the received picture in [Full Screen Mode].