Sony RDR VXD655 Operating Instructions - Page 17
Hookups and Settings, Hooking Up the Recorder, Step 1: Unpacking, Step 2: Connecting the Antenna Cable - remote for
UPC - 027242708792
View all Sony RDR VXD655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Hookups and Settings Hookups and Settings Hooking Up the Recorder Follow steps 1 to 7 to hook up and adjust the settings of the recorder. Notes • Plug cords securely to prevent unwanted noise. • See the instructions supplied with the components to be connected. • You cannot connect this recorder to a TV that does not have a video input jack. • Be sure to disconnect the power cord of each component before connecting. Do not connect the power cord until you reach "Connecting the Power Cord" on page 26. Notes • If your antenna is a flat cable (300-ohm twin lead cable), use an external antenna connector (not supplied) to connect the antenna to the recorder. • If you have separate cables for VHF and UHF antennas, use a UHF/VHF band mixer (not supplied) to connect the antenna to the recorder. Step 1: Unpacking Check that you have the following items: • Audio/video cord (phono plug × 3 y phono plug × 3) (1) • Antenna cable (1) • Remote commander (remote) (1) • Size AA (R6) batteries (2) Step 2: Connecting the Antenna Cable Select one of the following antenna hookups. Do not connect the power cord until you reach "Connecting the Power Cord" on page 26. If you have Hookup Cable box or satellite receiver with a A (page 18) video/audio output Cable box with an antenna output B (page 19) only Cable without cable box, or antenna C (page 20) only (no cable TV) ,continued 17