Sony STR DA2400ES Operating Instructions - Page 10
Function, on/standby, Input, buttons, Numeric, number 5, ENT/MEM, CLEAR - av
UPC - 027242729872
View all Sony STR DA2400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Name Function A AV ?/1 Press to turn on or off the audio/ (on/standby) video components that the remote is programmed to operate. To turn the TV on or off, press TV (X) and then press AV ?/1. If you press ?/1 (B) at the same time, it will turn off the receiver and other components (SYSTEM STANDBY). Note The function of the AV ?/1 switch changes automatically each time you press the input buttons (D). B ?/1 Press to turn the receiver on or (on/standby) set it to standby mode. To turn off all components, press ?/1 and AV ?/1 (A) at the same time (SYSTEM STANDBY). C AMP D Input buttons Saving the power in standby mode. When "Control for HDMI" (page 89) and "RS-232C Control" (page 58) is set to "OFF". Press to enable the receiver operation (page 106). Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components (page 50). You can program the remote to control non-Sony components following the steps in "Programming the remote" on page 120. Name Function Numeric Press SHIFT (W) and then buttons press numeric buttons to (number 5a)) - preset/tune to preset stations. - select track numbers of the CD player, VCD player, LD player, DVD player, MD deck, DAT deck, or tape deck. Press 0/10 to select track number 10. - select channel numbers of the VCR, satellite tuner, Blu- ray disc player, PSX, DVD/ VHS COMBO, or DVD/ HDD COMBO. Press TV (X), and then press the numeric buttons to select the TV channels. ENT/MEM Press SHIFT (W) and then press ENT/MEM to - enter the value after selecting a channel, disc or track using the numeric buttons of the VCR, CD player, VCD player, LD player, MD deck, DAT deck, tape deck, satellite tuner, Blu-ray disc player, or PSX. - store a station during tuner operation. To enter the value of Sony TV, press TV (X) and then press ENT/MEM. CLEAR Press SHIFT (W) and then press CLEAR to - clear a mistake when you press the incorrect numeric button of the DVD player, Blu-ray disc player, PSX, satellite tuner, DVD/VHS COMBO, or DVD/HDD COMBO. - return to continuous playback, etc. of the satellite tuner or DVD player. -/-- Press SHIFT (W) and then press -/-- to select the channel entry mode, either one or two digit of the VCR or satellite tuner. To select the channel entry mode of the TV, press TV (X) and then press -/--. 10US