Sony STR DA2400ES Operating Instructions - Page 114
When you select PHASE INFO., Press 2CH/A.DIRECT, A.F.D., MOVIE, or MUSIC repeatedly.
UPC - 027242729872
View all Sony STR DA2400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Item Explanation EXIT Exits the setting process without saving the measurement results. 3 Select "SAVE EXIT" in step 2. The measurement results are saved. 4 Press V/v repeatedly to select the Auto Calibration Type, then press . Auto Calibration Type FULL FLAT ENGINEER FRONT REF OFF Explanation Makes the measurement of frequency from each speaker flat. Sets the frequency characteristics to a set that matches that of the Sony listening room standard. Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. Set the Auto Calibration EQ to off. Tip The size of a speaker (LARGE/SMALL) is determined by the low frequency characteristics. The measurement results may vary, depending on the position of the optimizer microphone and speakers, and the shape of the room. It is recommended that you follow the measurement results. However, you can change those settings in the Speaker settings menu. Save the measurement results first, then try to change the settings if you want. When you select "PHASE INFO." You can check the phase of each speaker (in phase/out of phase). Press V/v repeatedly to select a speaker, then press to return to step 1 in "To confirm/save Auto Calibration when GUI function is turned off". Display window xxx*:IN xxx*:OUT xxx*- - - Explanation The speaker is in phase. The speaker is out of phase. The "+" and "-" terminals of the speaker may be connected the other way around. However, depending on the speakers, "xxx:OUT" appears on the display even though the speakers are connected properly. This is because of the speakers' specifications. In this case, you can continue to use the receiver. No speakers are connected. * xxx represent a speaker channel. FL Front Left FR Front Right CNT Center SL Surround Left SR Surround Right SB Surround Back SBL Surround Back Left SBR Surround Back Right SW Subwoofer Tip Depending on the position of the subwoofer, the measurement results for polarity may vary. However, there will be no problems even if you continue to use the receiver with that value. Selecting a sound field type For details on each sound field type, see "Enjoying a pre-programmed sound field" (page 59). Press 2CH/A.DIRECT, A.F.D., MOVIE, or MUSIC repeatedly. The selected sound field type appears on the display. 114US