Sony STR DA2400ES Operating Instructions - Page 135

Specifications, AUDIO POWER

Get Sony STR DA2400ES - 7.1 Channel Home Theater AV Receiver PDF manuals and user guides
UPC - 027242729872
View all Sony STR DA2400ES manuals
Add to My Manuals
Save this manual to your list of manuals

Page 135 highlights

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section Power Output Rated Power Output at Stereo Mode1) (8 ohms 20 Hz - 20 kHz, THD 0.09%): 100 W + 100 W Reference Power Output at Stereo Mode (4 ohms 20 Hz - 20 kHz, THD 0.15%): 85 W + 85 W Reference Power Output (8 ohms 1 kHz, THD 0.7%) FRONT2): 110 W + 110 W CENTER2): 110 W SURROUND2): 110 W + 110 W SUR BACK2): 110 W + 110 W Reference Power Output (4 ohms 1 kHz, THD 0.7%) FRONT2): CENTER2): SURROUND2): SUR BACK2): 100 W + 100 W 100 W 100 W + 100 W 100 W + 100 W 1)Measured under the following conditions: 120 V AC, 60 Hz 2)Depending on the sound field settings and the source, there may be no sound output. Frequency response PHONO RIAA equalization curve ± 0.5 dB Analog 10 Hz - 100 kHz, ± 3 dB (with sound field and equalizer bypassed) Input PHONO Analog Digital (Coaxial) Digital (Optical) Output (analog) AUDIO OUT SUBWOOFER Equalizer Gain levels Sensitivity: 2.5 mV Impedance: 50 kohms S/N3): 90 dB (A, 20 kHz LPF)4) Sensitivity: 150 mV/ 50 kohms S/N3): 100 dB (A, 20 kHz LPF)4) Impedance: 75 ohms S/N3): 96 dB (A, 20 kHz LPF)4) S/N3): 96 dB (A, 20 kHz LPF)4) Voltage: 150 mV/ 1 kohm Voltage: 2 V/1 kohm ±10 dB, 1 dB step 3)INPUT SHORT (with sound field and equalizer bypassed). 4)Weighted network, input level. FM tuner section Tuning range 87.5 - 108.0 MHz Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range With 10-kHz tuning scale 530 - 1,710 kHz5) With 9-kHz tuning scale 531 - 1,710 kHz5) Antenna (aerial) Loop antenna (aerial) Intermediate frequency 450 kHz 5)You can change the AM tuning scale to either 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down TUNING MODE, press POWER on the receiver. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. continued 135US Additional Information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
135
US
Additional Information
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Power Output
Rated Power Output at Stereo Mode
1)
(8 ohms 20 Hz – 20 kHz, THD 0.09%):
100 W + 100 W
Reference Power Output at Stereo Mode
(4 ohms 20 Hz – 20 kHz, THD 0.15%):
85 W + 85 W
Reference Power Output (8 ohms 1 kHz, THD
0.7%)
FRONT
2)
:
110 W + 110 W
CENTER
2)
:
110 W
SURROUND
2)
:
110 W + 110 W
SUR BACK
2)
:
110 W + 110 W
Reference Power Output (4 ohms 1 kHz, THD
0.7%)
FRONT
2)
:
100 W + 100 W
CENTER
2)
:
100 W
SURROUND
2)
:
100 W + 100 W
SUR BACK
2)
:
100 W + 100 W
1)
Measured under the following conditions:
120 V AC, 60 Hz
2)
Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
PHONO
RIAA equalization curve
± 0.5 dB
Analog
10 Hz – 100 kHz,
± 3 dB (with sound field
and equalizer bypassed)
Input
PHONO
Sensitivity: 2.5 mV
Impedance: 50 kohms
S/N
3)
: 90 dB (A, 20 kHz
LPF)
4)
Analog
Sensitivity: 150 mV/
50 kohms
S/N
3)
: 100 dB (A, 20 kHz
LPF)
4)
Digital (Coaxial)
Impedance: 75 ohms
S/N
3)
: 96 dB
(A, 20 kHz LPF)
4)
Digital (Optical)
S/N
3)
: 96 dB
(A, 20 kHz LPF)
4)
Output (analog)
AUDIO OUT
Voltage: 150 mV/
1 kohm
SUBWOOFER
Voltage: 2 V/1 kohm
Equalizer
Gain levels
±10 dB, 1 dB step
3)
INPUT SHORT (with sound field and equalizer
bypassed).
4)
Weighted network, input level.
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
With 10-kHz tuning scale
530 – 1,710 kHz
5)
With 9-kHz tuning scale
531 – 1,710 kHz
5)
Antenna (aerial)
Loop antenna (aerial)
Intermediate frequency
450 kHz
5)
You can change the AM tuning scale to either 9
kHz or 10 kHz. After tuning in any AM station,
turn off the receiver. While holding down
TUNING MODE, press POWER on the receiver.
All preset stations will be erased when you change
the tuning scale. To reset the scale to 10 kHz (or 9
kHz), repeat the procedure.
continued