Sony STR DA2400ES Operating Instructions - Page 46
Performing Auto Calibration, Press GUI MODE to select GUI - test
UPC - 027242729872
View all Sony STR DA2400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Performing Auto Calibration The Auto Calibration function allows you to measure the following: • Speaker connectionsa) • Speaker polarity • Speaker distancea) • Speaker sizea) • Speaker level • Frequency characteristicsa)b) a) The measurement result is not utilized in the following cases. -The multi channel input is selected. -"Analog Direct" is being used. b) The measurement result is not utilized in the following cases. -Dolby TrueHD signals with a sampling frequency of more than 96 kHz are being received. -PCM signals with a sampling frequency of more than 96 kHz are being received. 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 1 2-5 HOME CATEGORY MENU 3 Press V/v repeatedly to select "Auto Calibration", then press or b. 4 Press V/v repeatedly to select "Auto Calibration Start", then press or b. 5 Press to select "START". 6 The measurement starts in five seconds. 7 Measurement starts. The measurement process will take approximately 30 seconds with a test tone. Wait until the measurement process completes. 1 Press GUI MODE to select "GUI ON". "GUI MODE" appears on the display window of the receiver and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. 2 Press V/v repeatedly to select "Settings", then press or b. The Settings menu list appears on the TV screen. Tip The measurements may not be performed correctly or Auto Calibration cannot be performed when special speakers, such as dipole speakers are used. 46US