Sony STR DA2400ES Operating Instructions - Page 47
To cancel the measurement, Confirming/saving the, measurement results - specifications
UPC - 027242729872
View all Sony STR DA2400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Getting Started To cancel the measurement The measurement will be canceled when you do the following: - Press ?/1, input buttons or MUTING. - Press SPEAKERS (OFF/A/B/A+B) on the receiver. - Change the volume level. - Connect the headphones. Confirming/saving the measurement results 1 Confirm the measurement result. When the measurement ends, a beep sounds. 2 Press V/v to select the item you want, then press . Item Explanation Retry Save Warning Phase* Distance Level Exit Performs the Auto Calibration again. Saves the measurement results and exits the setting process. Displays warning concerning the measurement results. See "Message list after Auto Calibration measurement" (page 49). Displays the phase of each speaker (in phase/out of phase). Displays the measurement result for speaker distance. Displays the measurement result for speaker level. Exits the setting process without saving the measurement results. * When the speaker(s) is (are) out of the phase, "OUT" is displayed on the TV screen. The "+" and "-" terminals of the speaker may be connected the other way around. However, depending on the speakers, "OUT" appears on the TV screen even though the speakers are connected properly. This is because of the speakers' specifications. In this case, you can continue to use the receiver. 3 Select "Save" in step 2, then press to save the measurement result. continued 47US