Sony STR-DA3400ES Operating Instructions (Large File - 15.18 MB) - Page 115
When you select PHASE INFO., Select SAVE EXIT in step 2.
View all Sony STR-DA3400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
2 Press V/v repeatedly to select the item, then press . Item Explanation RETRY Performs the Auto Calibration again. SAVE EXIT Saves the measurement results and exits the setting process. WARN CHECK Displays a warning concerning the measurement results. See "Message list after Auto Calibration measurement" (page 49). PHASE INFO. Displays the phase of each speaker (in phase/out of phase). See "When you select "PHASE INFO."" (page 115). DIST. INFO. Displays the measurement result for speaker distance. LEVEL INFO. Displays the measurement result for speaker level. EXIT Exits the setting process without saving the measurement results. 3 Select "SAVE EXIT" in step 2. The measurement results are saved. 4 Press V/v repeatedly to select the Auto Calibration type, then press . Auto Calibration type Explanation FULL FLAT ENGINEER FRONT REF OFF Makes the measurement of frequency from each speaker flat. Sets the frequency characteristics to a set that matches that of the Sony listening room standard. Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. Set the Auto Calibration EQ to off. Tip The size of a speaker (LARGE/SMALL) is determined by the low frequency characteristics. The measurement results may vary, depending on the position of the optimizer microphone and speakers, and the shape of the room. It is recommended that you follow the measurement results. However, you can change those settings in the Speaker settings menu. Save the measurement results first, then try to change the settings if you want. When you select "PHASE INFO." You can check the phase of each speaker (in phase/out of phase). Press V/v repeatedly to select a speaker, then press to return to step 1 in "To confirm/save Auto Calibration when GUI function is turned off". Display window xxx*: IN xxx*: OUT xxx* - - - Explanation The speaker is in phase. The speaker is out of phase. The "+" and "-" terminals of the speaker may be connected the other way around. However, depending on the speakers, "OUT" appears on the display window even though the speakers are connected properly. This is because of the speakers' specifications. In this case, you can continue to use the receiver. No speakers are connected. * xxx represent a speaker channel. FL Front Left FR Front Right CNT Center SL Surround Left SR Surround Right SB Surround Back SBL Surround Back Left SBR Surround Back Right SW Subwoofer Tip Depending on the position of the subwoofer, the measurement results for polarity may vary. However, there will be no problems even if you continue to use the receiver with that value. Other Operations 115US