Sony STR-DA3400ES Operating Instructions (Large File - 15.18 MB) - Page 43
Selecting the front speakers, then press
View all Sony STR-DA3400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Getting Started 4 Press V/v repeatedly to select "Impedance", then press . Selecting the front speakers You can select the front speakers you want to drive. SPEAKERS (OFF/A/B/A+B) 5 Press V/v repeatedly to select "4 Ω" or "8 Ω" depending on the speakers you are using, then press . Press SPEAKERS (OFF/A/B/A+B) repeatedly to select the front speaker system you want to drive. Note This setting is not available when headphones are connected. Notes • If you are not sure of the impedances of the speakers, refer to the operating instructions supplied with your speakers. (This information is often found on the back of the speaker.) • When you connect all speakers with a normal impedance of 8 ohms or higher, set "Impedance" to "8 Ω". When connecting other types of speakers, set it to "4 Ω". • When you connect front speakers to both the SPEAKERS A and B terminals, connect the speakers with a normal impedance of 8 ohms or higher. - When you connect speakers with impedance of 16 ohms or higher in both "A" and "B" configuration: Set "Impedance" to "8 Ω" in the Speaker settings menu. - For other types of speakers in other configurations: Set "Impedance" to "4 Ω" in the Speaker settings menu. To select Light up The speakers connected to the SP A FRONT SPEAKERS A terminals. The speakers connected to the SP B FRONT SPEAKERS B terminals. The speakers connected to both the SP A+B FRONT SPEAKERS A and B terminals (parallel connection). To turn off the speaker output Press SPEAKERS (OFF/A/B/A+B) repeatedly until the "SP A", "SP B" and "SP A+B" indicators on the display window lights off. "ALL OFF" appears in the display window. 43US