Sony STR-DA3400ES Operating Instructions (Large File - 15.18 MB) - Page 68

5 Press V/v repeatedly to select the speaker pattern you want. 4 Press V/v repeatedly to select "Test Tone", then press . Making settings with the Test Tone menu INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 1 2-7 HOME CATEGORY MENU TUNING CATEGORY MODE TUNING DISC SKIP 1 Press GUI MODE repeatedly to select "GUI ON". "GUI MODE" appears in the display window of the receiver and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. 2 Press V/v repeatedly to select "Settings", then press or b. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select "Speaker", then press or b. 5 Press B/b repeatedly to select test tone type, then press . 6 Press V/v repeatedly to select the speaker you want to adjust, then press . The test tone is output from each speaker in sequence. 7 Press V/v repeatedly to adjust the parameter, then press . Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/-. • The adjusted value is shown on the display during adjustment. When a test tone is not output from the speakers • The speaker cords may not be connected securely. Check to see if they are connected securely and cannot be disconnected by pulling on them slightly. • The speaker cords may have the short-circuit problem. When a test tone is output from a different speaker than the speaker displayed on the screen The speaker pattern to the connected speaker is not set up correctly. Make sure the speaker connection and the speaker pattern match. 68US