Sony TRV950 Operating Instructions - Page 190
Connecting your camcorder to your computer using the USB cable, For Windows users - dcr driver
UPC - 027242607460
View all Sony TRV950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Connecting your camcorder to your computer using the USB cable - For Windows users (11) Follow the on-screen messages so that the Add Hardware Wizard recognizes that the USB drivers have been installed. The Add Hardware Wizard starts three times because three different USB drivers are installed. Be sure to allow the installation to complete without interrupting it. For Windows 2000 Professional, Windows XP Home Edition/Professional users (12) After the "File Needed" screen appears. Open "Browse..." t "My Computer" t "ImageMixer" t "Sonyhcb.sys", and click "OK." Viewing images recorded on a "Memory Stick" Set USBCONNECT in to NORMAL in the menu settings. (The default setting is set to NORMAL.) (1) Insert a "Memory Stick" into your camcorder. (2) Connect the AC power adaptor and set the POWER switch to MEMORY/ NETWORK (DCR-TRV950 only). (3) Connect the (USB) jack on your camcorder to the USB connector on your computer using the supplied USB cable. USB MODE appears on the LCD screen of your camcorder. Your computer recognizes the camcorder, and the Add Hardware Wizard starts. (USB) jack Push into the end USB connector USB cable (supplied) (4) Follow the on-screen messages to make the Add Hardware Wizard recognize that the USB drivers have been installed. The Add Hardware Wizard starts two times because two different USB drivers are installed. Be sure to allow each installation to complete without interrupting it. You cannot install the USB driver if a "Memory Stick" is not in your camcorder. Be sure to insert a "Memory Stick" into your camcorder before installing the USB driver. 190