Sony TRV950 Operating Instructions - Page 48
Recording still images on a Memory Stick during tape recording, Recording images with the flash
UPC - 027242607460
View all Sony TRV950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Recording still images on a "Memory Stick" during tape recording Recording images with the flash The flash pops up automatically. The default setting is auto (no indicator). To change the flash mode, press (flash) repeatedly until the flash mode indicator appears on the screen. (flash) Each press of (flash) changes the indicator as follows: t t t (no indicator) Auto red-eye reduction: The flash fires before recording to reduce red-eye. Forced flash: The flash fires regardless of the surrounding brightness. No flash: The flash does not fire. The flash is automatically adjusted to the appropriate brightness. You can also change FLASH LVL to the desired brightness in the menu settings (p. 208). Try recording various images to find the most appropriate setting for FLASH LVL. Notes •Attaching the lens hood or a conversion lens (optional) may block the light from the flash or cause lens shadow to appear. •You cannot use an external flash (optional) and the built-in flash at the same time. • (auto red-eye reduction) may not produce the desired effect depending on individual differences, the distance to the subject, the subject not looking at the prerecording flash or other conditions. •A flash effect cannot be obtained easily when you use forced flash in a bright location. •When recording with the flash, it takes longer to prepare for image capture. This is because your camcorder starts to charge power for firing after the flash pops up. Darken the surroundings by covering the lens, and press PHOTO lightly so that your camcorder starts to charge power after the flash pops up. •If it is not easy to focus on the subject automatically, for example, when recording in the dark, use the focal distance information (p. 77) for focusing manually. When the flashlight does not reach to the subject The color of the image may change. If you leave your camcorder for five or more minutes after removing the power supply Your camcorder returns to the default setting (auto). 48