Sony TRV950 Operating Instructions - Page 25

Getting Started Step 4 Using the touch panel Notes •When using the touch panel, press operation buttons with your thumb supporting the LCD panel from the back side of it or press those buttons lightly with your index finger. •Do not press the LCD screen with sharp-pointed objects other than the supplied stylus. (DCR-TRV950 only) •Do not press the LCD screen too hard. •Do not touch the LCD screen with wet hands. •If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You can control the display with DISPLAY/TOUCH PANEL on your camcorder. •When operation buttons do not work even if you press them, an adjustment is required (CALIBRATION) (p. 238). •When the LCD screen gets dirty, clean it with the supplied cleaning cloth. When executing each item The green bar appears above the item. If the items are not available The color of the items changes to gray. Press FN to display the following buttons: When the POWER switch is set to CAMERA PAGE1 END SCH, SPOT FOCUS, DIG EFFT, MEM MIX, SPOT METER PAGE2 LCD BRT, SELFTIMER When the POWER switch is set to VCR PAGE1 LCD BRT, PB, INDEX, END SCH PAGE2 PB ZOOM, PB, INDEX, DIG EFFT See page 129 when the POWER switch is set to MEMORY/NETWORK (DCR-TRV950 only). 25