Sony TRV950 Operating Instructions - Page 98

Dubbing only desired scenes - Digital program editing (on tapes) You can duplicate selected scenes (programs) for editing onto a tape without operating the VCR. Scenes can be selected by frame. You can set up to 20 programs. Your camcorder can dub on a "Memory Stick." See p. 160 for more information. Unwanted scene Unwanted scene Switch the order Before operating the Digital program editing on tapes recorded on other equipment Step 1 Connecting the VCR. Step 2 Setting the VCR for operation (p. 99, 103). Step 3 Adjusting the synchronization of the VCR (p. 104). When you dub using the same VCR again, you can skip steps 2 and 3. Using the Digital program editing on tapes recorded on other equipment Operation 1 Making a program (p. 106). Operation 2 Performing the program (dubbing a tape) (p. 108). Note When editing digital video on tapes, the operation signals cannot be sent with the LANC. Step 1: Connecting the VCR You can connect both an A/V connecting cable and an i.LINK cable. When you use the A/V connecting cable, connect the devices as illustrated on page 95. When you use the i.LINK cable, connect the devices as illustrated on page 97. If you connect using the i.LINK cable With a digital-to-digital connection, video and audio signals are transmitted in digital form for high-quality editing. 98