Sony TRV950 Operating Instructions - Page 97

Dubbing a tape Using the i.LINK cable Simply connect the i.LINK cable (optional) to the DV Interface on your camcorder and to DV IN on the DV products. With a digital-to-digital connection, video and audio signals are transmitted in digital form for high-quality editing. You cannot dub the titles, display indicators or the contents of cassette memory or letters on the "Memory Stick" index screen. Set the input selector on the VCR to the DV input position if the VCR is equipped with the input selector. (1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder. (2) Prepare the VCR for recording, then set the input selector to LINE. Refer to the operating instructions of the VCR. (3) Set the POWER switch to VCR on your camcorder. (4) Play back the recorded tape on your camcorder. (5) Start recording on the VCR. Refer to the operating instructions of the VCR. Editing DV DV DV IN : Signal flow i. LINK cable (optional) When you have finished dubbing a tape Press x on both your camcorder and the VCR. You can connect one VCR only using the i.LINK cable See page 233 for more information about i.LINK. Pictures processed by the picture effect, the digital effect or PB ZOOM These pictures are not output through the DV Interface. If you record a playback pause picture with the DV Interface The recorded picture becomes rough. Also, when you play back the picture using other video equipment, the picture may jitter. 97