TEAC CRH227I Owners Manual - Page 11

F iPod Dock Connect the Dock to the iPod port. < Make sure the label side of the plug is up. < Securely insert the plug until a slight "click" is heard. To disconnect the Dock: Squeeze both sides of the plug and pull. I AUX 3 IN You can connect a portable audio player to this jack. Connect the LINE OUT or PHONES jack (audio output jack) of the player using a commercially available stereo mini plug cable. < When using the PHONES jack of your mini player, you must adjust the volume of the mini-player or you may hear no sound from your CR-H227i. label side G VIDEO OUT terminal This terminal outputs video signal from iPod. Use an RCA (pin) video cable to connect the Dock to the composite video connector of a television or monitor. < Select "Click Wheel Mode" to output video signal (see page 24). J Headphones For private listening, insert the headphones plug into this jack, and adjust the volume by turning the VOLUME knob. H S-VIDEO OUT terminal This terminal outputs video signal from iPod. Use an S-Video cable to connect the Dock to the S-Video input of a suitably equipped television or monitor. Use this connection in preference to a composite video connection. < Select "Click Wheel Mode" to output video signal (see page 24). 11