TEAC CRH227I Owners Manual - Page 30

Programmed Playback (CD/MP3/WMA) Up to 32 tracks can be programmed in the desired order. 1 Press the PROGRAM button in the stop mode. 3 When programming has been finished, press the PLAY button (y) to start programmed playback. 2 Select a track using the numeric buttons. When the playback of all the programmed tracks has finished, or if the STOP button or the STANDBY/ON button is pressed, the program mode will be cancelled. But the programmed contents aren't lost. You can return to the programmed playback by pressing the PROGRAM button and the PLAY button (y). < If the disc tray is opened or the power cord is unplugged, the programmed contents will be erased. < If the numeric buttons don't work, first press the CD button, and then press the number. < You can also use the SKIP button and the PROGRAM button to program tracks. Select a track using the SKIP button (. or /), and within 5 seconds press the PROGRAM button. Repeat this step to program more tracks. < If you made a mistake, press the CLEAR button. The last programmed number will be deleted. < Up to 32 tracks can be programmed. If you attempt to program more than 32 tracks, "P-FULL (Program is full)" is displayed and no more can be programmed. 30