TEAC CRH227I Owners Manual - Page 31
To check the programmed order, To add a track to the program, To delete a track from the program,
View all TEAC CRH227I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
To check the programmed order To clear the program 1. In the stop mode, press the PROGRAM button. In the stop mode, press the PROGRAM button repeatedly. The track number and program number will be shown on the display. To add a track to the program 2. Hold down the CLEAR button for more than 4 seconds. In the stop mode, press the PROGRAM button repeatedly until the program number you want to insert a track appears on the display. If you want to add a track to the end of the program, press the PROGRAM button repeatedly until "P-End" briefly appears on the display. Then select a track number using the numeric buttons. The track is added to the program. < If one of the following buttons is pressed, the programmed contents will also be cleared: SOURCE (AUX, TUNER, TAPE, iPod), OPEN/CLOSE (L), BAND < If the unit is disconnected from the power supply, the programmed contents will be cleared. To delete a track from the program In the stop mode, press the PROGRAM button repeatedly until the program number to be deleted appears on the display, then press the CLEAR button. The selected track/file is deleted from the program. 31