TEAC CRH227I Owners Manual - Page 12
Connecting Antennas
View all TEAC CRH227I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting Antennas AM Indoor Loop Antenna The high-performance AM loop antenna provided with this unit is sufficient for good reception in most areas. To stand the loop antenna on a surface, fix the claw to the slot in the antenna base. AM Outdoor Antenna If the AM loop antenna provided does not deliver sufficient reception (often due to being too far from the transmitter or in a concrete building, etc.), it may be necessary to use an outdoor AM antenna. Use either a high quality commercial AM antenna or, if not available, an insulated wire more than 5 m long, strip one end, and connect this to the terminal as shown. The antenna wire should be strung outdoors or indoors near a window. For better reception, connect the GND terminal to a reliable ground. Note: Even when using an outdoor AM antenna, do not disconnect the AM loop antenna. Connect the loop antenna's wires to the AM antenna terminals. Make sure to connect: white wire q right terminal black wire q left terminal (GND) Place the antenna on a shelf or hang it on a window frame, etc., in the direction which gives the best reception. Keep all other wires such as power cords, speaker wires or interconnect wires as far away as possible from the antenna. 12