TEAC CRH227I Owners Manual - Page 4

Contents Before Use Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Important Safety Instructions 2 Before Use 4 Contents 4 Discs 6 Connection 8 Connecting Antennas 12 Identifying the Parts 14 Remote Control Unit 18 Basic Operation 19 iPod Getting started with iPod 22 Listening to iPod 23 CD/MP3/WMA Listening to CD/MP3/WMA 26 Direct Playback 28 Repeat Playback 29 Programmed Playback 30 Shuffle Playback 32 Time Display 32 TUNER Listening to the Radio 33 Preset Tuning 34 RDS 36 RDS (PTY Search 37 RDS (PTY 38 Setting the Clock 39 Setting the Timer 40 Troubleshooting 42 Specifications 43 Read this before operation < As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. < The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. < Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture. < Do not place the unit on an amplifier/receiver. < Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the set, contact your dealer or service agency. < When removing the power plug from the wall outlet, always pull directly on the plug, never yank the cord. < To keep the laser pickup clean, do not touch it, and do not forget to close the disc tray when not using the CD player. < Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth. < Keep this manual in a safe place for future reference. DO NOT MOVE THE UNIT DURING PLAYBACK During playback, the disc rotates at high speed. Do NOT lift or move the unit during playback. Doing so may damage the disc. WHEN MOVING THIS UNIT When changing places of installation or packing the unit for moving, be sure to remove the disc and return the disc table to its original position in the player. Then, press the power switch to turn the power off, and disconnect the power cord. Moving this unit with the disc loaded may result in damage to this unit. 4