TEAC CRH227I Owners Manual - Page 33
Listening to the Radio
View all TEAC CRH227I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Listening to the Radio 23 4 Press the TUNING button to tune in a station. 1 FM MODE 1 Press the TUNER button of the remote control unit (or repeatedly press the SOURCE button) to select "TUNER". In the Auto tune mode, the unit starts searching for a station. When a station is tuned in, the tuning process will stop automatically. Repeat this step until the station you want to listen to is found. < If you want to stop the tuning process, press the TUNING button. < You can also use the BAND button or the remote control unit to select "TUNER". 2 Select AM or FM by pressing the BAND button. In the Manual tune mode, the frequency changes by a fixed step. Repeatedly press (or hold down) the TUNING button until the station you want to listen to is found. < The "TUNED" indicator lights when a station is correctly tuned in. If the reception is poor Rotate or relocate the antenna to find the best position for reception. 3 Press the TUNING MODE button to select the tuning mode. FM MODE Button Pressing this button alternates between Stereo mode and Mono mode. Each time the TUNING MODE button is pressed, the tuning mode changes as follows: Manual tune, Auto tune, Preset tune Select "Manual tune" or "Auto tune". Stereo FM stereo broadcasts are received in stereo and the "STEREO" indicator lights in the display. < If the sound is distorted and the "STEREO" indicator flashes, the signal is not strong enough for good stereo reception. In this case, change to Mono mode. Mono To compensate for weak FM stereo reception, select this mode. Reception will now be forced to monaural, reducing unwanted noise. 33