TP-Link AC3200 Archer C3200 V1 User Guide - Page 54
Use WPS for Wireless Connection, 11. 7. 1. Set the Router’s PIN
View all TP-Link AC3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
To change the security option: In the Wireless section, select an option from the Security dropdown list. The router provides four security options, No Security, WPA/WPA2 - Personal (Recommended), WPA/WPA2 - Enterprise and WEP. We recommend you don't change the default settings unless necessary. If you select other options, configure the related parameters according to the help page. In addition • Mode - Select a transmission mode according to your wireless client devices. 802.11b/g/n mixed, 802.11g/n mixed or 802.11n only for 2.4GHz; and 802.11a/n/ac mixed, 802.11n/ac mixed or 802.11ac only for 5GHz. It is recommended to just leave it as default. • Channel Width - Select a channel width (bandwidth) for the wireless network. • Channel - Select an operating channel for the wireless network. It is recommended to leave the channel to Auto, if you are not experiencing the intermittent wireless connection issue. • Transmit Power - Select either High, Middle or Low to specify the data transmit power. The default and recommended setting is High. 11. 7. Use WPS for Wireless Connection Wi-Fi Protected Setup(WPS) gives consumers an easier approach to set up a security-protected Wi-Fi connection. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Advanced > Wireless > WPS . 11. 7. 1. Set the Router's PIN Router's PIN is enabled by default to allow wireless devices to connect to the router using the PIN. You can use the default one or generate a new one. Note: 1. If you want to enable/disable the WPS feature, go to System Tools > System Parameters > WPS, select or clear the Enable WPS check box. 2. PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can connect to your router with the PIN. The default PIN is labeled on the bottom of the router. 11. 7. 2. Use the WPS Wizard for Wi-Fi Connections 1. Select a setup method: • Push Button (Recommended): Click the Connect button on the screen. Within two minutes, push the WPS button on the client device. Chapter 11 . Customize Your Network Settings 51