TP-Link AC3200 Archer C3200 V1 User Guide - Page 57
column, Enter Site B's WAN IP address., of Site B.
View all TP-Link AC3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
3 ) In the IPSec Connection Name column, specify a name. 4 ) In the Remote IPSec Gateway (URL) column, Enter Site B's WAN IP address. 5 ) To configure Site A's LAN: In the Tunnel access from local IP addresses column, here we take Subnet Address as an example. Then input the LAN IP range of Site A in the IP Address for VPN column, and input Subnet Mask of Site A. 6 ) To configure Site B's LAN: In the Tunnel access from remote IP addresses column, here we take Subnet Address as an example. Then input the LAN IP range of Site B in the IP Address for VPN column, and input Subnet Mask of Site B. 7 ) Select the Key Exchange Method for the policy. We select Auto(IKE) here. 8 ) Enter the Pre-Shared Key for IKE authentication. Then keep Perfect Forward Secrecy enabled. Note: • The key should consist of visible characters without blank space. • Make sure Site A and Site B use the same key. Chapter 11 . Customize Your Network Settings 54