TP-Link TL-R480T User Guide - Page 34
DHCP Settings, DHCP Server - Enable
UPC - 696726480020
View all TP-Link TL-R480T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
TL-R480T SMB Broadband Router User Guide explanations for each submenu are provided below. 4.4.1 DHCP Settings Choose menu "DHCP→DHCP Settings", you can configure the DHCP in the next screen (shown in Figure 4-15). The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PCs that are connected to the router on the LAN. Figure 4-15 ¾ DHCP Server - Enable or disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must manually configure the computer. ¾ Start IP Address - This field specifies the first address in the IP address pool. The default address is 192.168.1.100. ¾ End IP Address - This field specifies the end address in the IP address pool. The default address is 192.168.1.199. ¾ Address Lease Time - This is the amount of time in which a network user will be allowed connection to the router with their current dynamic IP address. Enter the amount of time (in minutes), the range of the time is 1 ~ 2880 minutes. The default value is 120 minutes. ¾ Default Gateway - Suggest to input the IP address of the LAN port of the router, default value is 192.168.1.1. (Optional) ¾ Default Domain - Input the domain name of your network. (Optional) ¾ Primary DNS - Input the DNS IP address provided by your ISP. You can consult your ISP for it. (Optional) ¾ Secondary DNS - Input the IP address of another DNS server if your ISP provides two DNS servers. (Optional) 28