TP-Link TL-R480T User Guide - Page 47

TL-R480T SMB Broadband Router User Guide Figure 4-32 Step 5: Finally, click Save to make the rule take effect. Step 6: Go to Step 2 to complete the other rules continually. After you finish the configurations, you will see the rules in the table below: Figure 4-33 ) Note: Before adding an IP Address Filtering entry, you should enable the Firewall and the IP Address Filtering function first (shown in Figure 4-27). Other configurations for the entries as shown in Figure 4-28: Click the Delete button to delete the entry. Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries. Click the Delete All button to delete all the entries. Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen. 4.6.4 MAC Filtering Choose menu "Security→MAC Filtering", you can configure the MAC Address filtering rule in the next screen (shown in Figure 4-34). The MAC Address Filtering feature allows you to control access to the Internet by users on your local network based on their MAC addresses. 41