TP-Link TL-R860 User Guide - Page 22
User Name, PPPoE, Password, Login, Logout, User Name/Password, Connect on Demand, Max Idle Time,
UPC - 845973040109
View all TP-Link TL-R860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
TL-R860 Cable/DSL Router User Guide Figure 4-7 WAN - 802.1X + Static IP ¾ User Name - Enter the user name for 802.1x authentication provided by your ISP ¾ Password - Enter the password for 802.1x authentication provided by your ISP. Click Login to start 802.1x authentication. Click Logout to end 802.1x authentication. 3. If you choose PPPoE, you should enter the following parameters (Figure 4-8): Figure 4-8 WAN - PPPoE ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time. This is because there may still be active applications in the background, which may cause fee accounted by your ISP. ¾ Connect Automatically - Connect automatically after the router is disconnected. To use this option, click the radio button. - 17 -