Texas Instruments TINSPIRE Teacher Software Guidebook - Page 93

• To transfer files to all connected TI-Nspire™ handhelds, select Connected Handhelds (top level). 3. In the Transfer Tool window, click Start Transfer. The Transfer Tool window switches to the Status tab and displays the transfer information. • The progress bar disappears when a transfer is complete. • During a transfer, the Transfer Tool indicates which handhelds are connected and successfully received files. • If a handheld disconnects and then reconnects during a transfer, the Transfer Tool indicates the status of completed transfers, and resumes transferring other files as necessary. Stopping file transfers You can stop a file transfer at any time. To stop a file transfer, complete the following steps: 1. In the Tranfer Tool, click Stop Transfer. The Confirm dialog box opens. 2. Click Yes to confirm. The Transfer Tool stops transferring and switches back to the Setup tab. • If a connected handheld has already received files, those files remain on the handhelds. • Files remain in the Setup tab until you close the Transfer Tool, or until you remove them by selecting the files and clicking Remove Selected. Closing the Transfer Tool When you have completed transferring files and folders, close the Transfer Tool. ` To close the Transfer Tool, click Close. • You cannot close the Transfer Tool if a transfer is active. Using the Transfer Tool 81