Toshiba 26HL67 Owner's Manual - English - Page 52

Chapter 6: Using the TV's features Setting the PC Audio This function allows you to output the sound from your PC (if connected) or mute the sound from your PC and output the sound from your HDMI (DVI) connection. (- page 19) To set the PC Audio: 1 Press Y and open the Audio menu. 2 Highlight Audio Setup and press T. 3 Press B or b to select PC Audio and then press C or c to select No or Yes. Yes: Outputs the sound from your PC. No: Mutes the sound from your PC, and outputs the sound from the HDMI-1 connection. Audio Setup PC Audio HDMI 1 Audio MTS Language Optical Output Format Dolby Digital Dynamic Range Control No Auto Stereo English Dolby Digital Compressed Reset Done Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to "No," the HDMI 1 Audio setting changes to "Auto." If PC Audio is set to "Yes," the HDMI 1 Audio setting is set to "Digital" and is grayed out in the menu. (Also see item 4 on page 11 and "Setting the HDMI™ Audio mode" on page 32.) Setting the sleep timer You can set the sleep timer to turn off the TV after a set length of time (maximum of 180 minutes). To set the sleep timer using the remote control: Press [ on the remote control to set the length of time until the TV turns off. Repeatedly press [ to increase the time in 10-minute increments, or press B or b to increase or decrease the time in 10-minute increments, to a maximum of 180 minutes. To set the sleep timer using the on-screen menus: 1 Press Y and open the Setup menu. 2 Highlight Sleep Timer and press T. Setup Installation Sleep Timer PC Settings Power-On Mode Power-Saving 3 Press the Number buttons to enter the length of time in 10-minute increments. Sleep Timer Enter total minutes until the TV turns off automatically (Maximum 180 minutes) 120 Cancel Done 4 Highlight Done and press T. Note: When a power failure occurs, the sleep timer setting may be cleared. To display the remaining sleep time: Press [. Sleep Timer 120 minutes Note: A message will display on-screen when there is one minute remaining on the sleep timer. To cancel the sleep timer: Repeatedly press [ until it is set to 0 minute. 52